Reglamento general de los foros   •   FAQ   •   Buscar en el foro •  Registrarse | Iniciar sesión 

Ver temas sin respuesta | Ver temas activos



Foros Linux » Entorno gráfico » X Window


Nuevo tema Responder al tema
 Página 1 de 1
  [ 9 mensajes ] 
Patrocinadores

Autor
Buscar:
Mensaje
Aancheta

Desconectado
Forista Nuevo
Forista Nuevo
Avatar de Usuario

Registrado: Vie May 16, 2008 11:00 pm
Mensajes: 4

Nota Publicado: Sab May 17, 2008 2:15 pm 
Arriba  
Hace unos dias instale slackware 12.1 y pude iniciar el modo grafica con startx pero despues de unos minutos la pantalla se volvio negra con unas rayas raras. y despues de eso ya no pude iniciar el modo grafico.
Ya pedi ayuda en otros foros y no me han podido ayudar.
me dijieron que configurara el xorg.conf pero yo soy principiante en linux, mis especificaciones de la maquina es:

Placa base
Tipo de procesador Intel Pentium 4E, 2666 MHz (5 x 533)
Nombre de la Placa Base Desconocido
Chipset de la Placa Base Intel Brookdale-G i845G
Memoria del Sistema 768 MB (DDR SDRAM)
Tipo de BIOS AMI (09/07/04)
Tarjeta gráfica Intel(R) 82845G/GL/GE/PE/GV Graphics Controller (64 MB)
Acelerador 3D Intel Extreme Graphics
Monitor Monitor Plug and Play [NoDB] (1450780152)

Espero que me ayuden..... De antemano gracias..


* Titulo editado por el Administrador por decir muy poco del tema a tratar, por favor, revisa el reglamento del foro

* Titulo editado por el Administrador por contener palabras como ayuda, problema con, auxilio, urgente, etc, por favor revisa el reglamento del foro

* Mensaje movido por el Administrador, del foro Kde, al foro X window por no pertenecer a dicho foro, por favor, revisa el reglamento del foro
 Perfil Email  
artzneo

Desconectado
Forista Ancestral
Forista Ancestral
Avatar de Usuario

Registrado: Dom Feb 12, 2006 12:00 am
Mensajes: 3162
Ubicación: mount /dev/mex /mnt/gdl

Nota Publicado: Sab May 17, 2008 3:08 pm 
Arriba  
si no estas familiarizado con linux intenta con ubuntu que tiene bastantes asistentes y es ideal para comenzar en esto . y pues te diria lo mismo revista tu /etc/X11/xorg.conf

ahorita te hablo de un slackware 11. no se si te sirva de algo te lo paso tambien tengo una intel...


Código:
# File generated by xf86config.

#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#

# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************

# NOTE:  This is a NEW IMPROVED version of XF86Config-fbdev that uses the vesa
# driver instead of the fbdev driver.  Thanks to Kenneth Fanyo who pointed
# this out to me. :)

# This XF86Config file is designed for use with the VESA framebuffer.
# This generic interface should work with nearly all video cards
# (although not every card will support every resolution).

# With the new driver, it should no longer be required to have frame buffer
# support in the kernel, or to run it on the console.
#
# Enjoy! :)
# -- volkerdi@slackware.com
#

# **********************************************************************
# Module section -- this  section  is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the DBE extension module.

    Load        "dbe"     # Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
    SubSection  "extmod"
      Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection

# This loads the font modules
    Load        "type1"
    Load        "freetype"
    #Load        "speedo"

# This loads the GLX module
    Load       "glx"

EndSection

# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

    RgbPath   "/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#

    FontPath   "/usr/X11R6/lib/X11/fonts/local/"
    FontPath   "/usr/X11R6/lib/X11/fonts/misc/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/Type1/"
    FontPath   "/usr/X11R6/lib/X11/fonts/CID/"
    FontPath   "/usr/X11R6/lib/X11/fonts/Speedo/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/"
    FontPath   "/usr/X11R6/lib/X11/fonts/cyrillic/"
    FontPath   "/usr/X11R6/lib/X11/fonts/TTF/"

# ModulePath can be used to set a search path for the X server modules.
# The default path is shown here.

#    ModulePath "/usr/X11R6/lib/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

#    Option     "NoTrapSignals"

# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12).  This allows clients to receive these key
# events.

#    Option     "DontVTSwitch"

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

#    Option     "DontZap"

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences.  This allows clients to receive these key events.

#    Option     "DontZoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

#    Option     "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client.

#    Option     "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.

#    Option     "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

#    Option     "AllowNonLocalModInDev"

# Set the basic blanking screen saver timeout.

#    Option      "blank time"    "10"    # 10 minutes

# Set the DPMS timeouts.  These are set here because they are global
# rather than screen-specific.  These settings alone don't enable DPMS.
# It is enabled per-screen (or per-monitor), and even then only when
# the driver supports it.

#    Option      "standby time"  "20"
#    Option      "suspend time"  "30"
#    Option      "off time"      "60"

# On some platform the server needs to estimate the sizes of PCI
# memory and pio ranges. This is done by assuming that PCI ranges
# don't overlap. Some broken BIOSes tend to set ranges of inactive
# devices wrong. Here one can adjust how aggressive the assumptions
# should be. Default is 0.

# Option   "EstimateSizesAggresively" "0"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

    Identifier   "Keyboard1"
    Driver   "kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

#    Option     "Protocol"      "Xqueue"

# Set the keyboard auto repeat parameters.  Not all platforms implement
# this.

#    Option     "AutoRepeat"    "500 5"

# Specifiy which keyboard LEDs can be user-controlled (eg, with xset(1)).

#    Option     "Xleds" "1 2 3"

# To disable the XKEYBOARD extension, uncomment XkbDisable.

#    Option     "XkbDisable"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a European
# keyboard, you will probably want to use one of:
#
#    Option     "XkbModel"      "pc102"
#    Option     "XkbModel"      "pc105"
#
# If you have a Microsoft Natural keyboard, you can use:
#
#    Option     "XkbModel"      "microsoft"
#
# If you have a US "windows" keyboard you will want:
#
#    Option     "XkbModel"      "pc104"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#
#    Option     "XkbLayout"     "de"
#
# or:
#
#    Option     "XkbLayout"     "de"
#    Option     "XkbVariant"    "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#
#    Option     "XkbOptions"    "ctrl:swapcaps"


# These are the default XKB settings for X.Org
#
#    Option     "XkbRules"      "xorg"
#    Option     "XkbModel"      "pc101"
#    Option     "XkbLayout"     "us"
#    Option     "XkbVariant"    ""
#    Option     "XkbOptions"    ""

EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

    Identifier   "Mouse1"
    Driver   "mouse"

    Option   "ZAxisMapping" "4 5"
    Option   "Buttons" "3"

# On platforms where PnP mouse detection is supported the following
# protocol setting can be used when using a newer PnP mouse:

#    Option     "Protocol"      "Auto"

# The available mouse protocols types that you can set below are:
#    Auto BusMouse GlidePoint GlidePointPS/2 IntelliMouse IMPS/2
#    Logitech Microsoft MMHitTab MMSeries Mouseman MouseManPlusPS/2
#    MouseSystems NetMousePS/2 NetScrollPS/2 OSMouse PS/2 SysMouse
#    ThinkingMouse ThinkingMousePS/2 Xqueue
    Option "Protocol"    "IMPS/2"

# The mouse device.  The device is normally set to /dev/mouse,
# which is usually a symbolic link to the real device.

    Option "Device"      "/dev/mouse"
#   Option "Device"      "/dev/psaux"
#   Option "Device"      "/dev/ttyS0"
#   Option "Device"      "/dev/ttyS1"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

#    Option "Protocol"   "Xqueue"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

#    Option "BaudRate"      "9600"
#    Option "SampleRate"   "150"

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

#    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"

# ChordMiddle is an option for some 3-button Logitech mice

#    Option "ChordMiddle"

EndSection

# Some examples of extended input devices

# Section "InputDevice"
#    Identifier "spaceball"
#    Driver     "magellan"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball2"
#    Driver     "spaceorb"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen0"
#    Driver     "microtouch"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "1412"
#    Option     "MaxX"          "15184"
#    Option     "MinY"          "15372"
#    Option     "MaxY"          "1230"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen1"
#    Driver     "elo2300"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "231"
#    Option     "MaxX"          "3868"
#    Option     "MinY"          "3858"
#    Option     "MaxY"          "272"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonThreshold"       "17"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

    Identifier  "My Monitor"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    HorizSync   31.5 - 150.0

#    HorizSync   30-64         # multisync
#    HorizSync   31.5, 35.2    # multiple fixed sync frequencies
#    HorizSync   15-25, 30-50  # multiple ranges of sync frequencies

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    VertRefresh 75-85

EndSection


# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

Section "Device"
    Identifier  "VESA Framebuffer"
    Driver      "vesa"
    #VideoRam    4096
    # Insert Clocks lines here if appropriate
EndSection

# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
    Identifier  "Screen 1"
    Device      "VESA Framebuffer"
    Monitor     "My Monitor"

# If your card can handle it, a higher default color depth (like 24 or 32)
# is highly recommended.

#   DefaultDepth 8
#   DefaultDepth 16
   DefaultDepth 24
#   DefaultDepth 32

# "1024x768" is also a conservative usable default resolution.  If you
# have a better monitor, feel free to try resolutions such as
# "1152x864", "1280x1024", "1600x1200", and "1800x1400" (or whatever your
# card/monitor can produce)

    Subsection "Display"
        Depth       8
        Modes "1024x768" "800x600" "640x480"
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes "1024x768" "800x600" "640x480"
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes "1024x768" "800x600" "640x480"
    EndSubsection
    Subsection "Display"
        Depth       32
        Modes "1024x768" "800x600" "640x480"
    EndSubsection

EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
    Identifier  "Simple Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.  In this example, screen 2 is located to the
# right of screen 1.

    Screen "Screen 1"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"

EndSection
 Perfil Email WWW ICQ YIM  
Aancheta

Desconectado
Forista Nuevo
Forista Nuevo
Avatar de Usuario

Registrado: Vie May 16, 2008 11:00 pm
Mensajes: 4

Nota Publicado: Sab May 17, 2008 5:07 pm 
Arriba  
Que tengo malo: :?:

Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/OTF"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi/:unscaled"
EndSection

Section "Module"
Load "dri"
Load "dbe"
Load "glx"
Load "extmod"
Load "record"
Load "GLcore"
Load "xtrap"
Load "type1"
Load "freetype"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc101"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
#DisplaySize 280 210 # mm
Identifier "Monitor0"
VendorName "EPI"
ModelName "CT520g"
### Comment all HorizSync and VertRefresh values to use DDC:
HorizSync 30.0 - 56.0
VertRefresh 50.0 - 120.0
Option "DPMS"
EndSection

Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "ColorKey" # <i>
#Option "CacheLines" # <i>
#Option "Dac6Bit" # [<bool>]
#Option "DRI" # [<bool>]
#Option "NoDDC" # [<bool>]
#Option "ShowCache" # [<bool>]
#Option "XvMCSurfaces" # <i>
#Option "PageFlip" # [<bool>]
Identifier "Card0"
Driver "intel"
VendorName "Intel Corporation"
BoardName "82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device"
BusID "PCI:0:2:0"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 8
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
 Perfil Email  
ExEKieLiTo

Desconectado
Forista Legendario
Forista Legendario
Avatar de Usuario

Registrado: Vie Dic 07, 2007 12:00 am
Mensajes: 2108
Ubicación: /dev/Argentina/buenos aires

Nota Publicado: Sab May 17, 2008 5:13 pm 
Arriba  
disculpa artzneo pero voy a contradecirte ^^

ya que eres principiante voy a darte un mini super mini cursito :P

xorg.conf es el archivo que se encarga de la configuracion de tu sistema grafico, slackware se ha quedado "colgado" al iniciar el entorno grafico debido a que tu configuracion es inadecuada ( no significa que tu lo allas configurado mal, sino que el sistema al reconocer tu hardware ha fallado y ha configurado mal el entorno grafico )

la forma de solucionarlo es utilizar los drivers vesa ( y rogar que asi ande xD )

fijate de modificar tu archivo xorg (en consola teclea)

Código:
pico /etc/X11/xorg.conf


busca la seccion device y fijate donde dice Driver poner "vesa"

en el codigo que cito artzneo seria esta parte:

Código:
Section "Device"
    Identifier  "VESA Framebuffer"
    Driver      "vesa"
    #VideoRam    4096
    # Insert Clocks lines here if appropriate
EndSection


una ves que lo tengas en vesa ejecuta startx y fijate que todo funcione bien. si no llegara a ser asi pega tu xorg.conf para ver como podemos ayudarte.

un saludo !!!

_________________
Amd 3600 x2 Dual Core - 2 gb Ram - Nvidia Gforce 7300 GS - Sata2 250 GB
--
Corriendo Slackware 12
 Perfil Email  
Aancheta

Desconectado
Forista Nuevo
Forista Nuevo
Avatar de Usuario

Registrado: Vie May 16, 2008 11:00 pm
Mensajes: 4

Nota Publicado: Sab May 17, 2008 10:46 pm 
Arriba  
Pero que configuro. En la direccion /etc/X11 tambien hay un archivo que se llama xorg.conf-vesa. Porque el xorg.conf es el que puse anteriormente. Como hago?????????

Ahhhhh tambien iniciando con el comando kdm si inicia el modo grafico y me da la resolucion de 1024*768 pero las imagenes aparecen distorcionadas en cualquier resolucion.
y con startx no me inicia.
 Perfil Email  
Pratt

Desconectado
Forista Medio
Forista Medio
Avatar de Usuario

Registrado: Mié May 04, 2005 11:00 pm
Mensajes: 353
Ubicación: Bogotá

Nota Publicado: Dom May 18, 2008 12:36 am 
Arriba  
Creo que esa tarjeta funciona con el driver i810 pero no estoy seguro.

Solo para corroborar, Como root ya intentaste corriendo el comando:
Código:
xorgsetup


O mejor aun
Código:
xorgconfig


cierto?

_________________
Mi Foro: http://www.hablarmierda.net
Mi Blog: http://www.michael-pratt.com/blog
Mis Distros: Slackware (Current)| Archlinux
 Perfil WWW  
Pratt

Desconectado
Forista Medio
Forista Medio
Avatar de Usuario

Registrado: Mié May 04, 2005 11:00 pm
Mensajes: 353
Ubicación: Bogotá

Nota Publicado: Dom May 18, 2008 12:38 am 
Arriba  
Que errores te sale en /var/log/X.0.log cuando ejecutas startx ?

_________________
Mi Foro: http://www.hablarmierda.net
Mi Blog: http://www.michael-pratt.com/blog
Mis Distros: Slackware (Current)| Archlinux
 Perfil WWW  
Aancheta

Desconectado
Forista Nuevo
Forista Nuevo
Avatar de Usuario

Registrado: Vie May 16, 2008 11:00 pm
Mensajes: 4

Nota Publicado: Dom May 18, 2008 12:58 pm 
Arriba  
El comando xorgsetup ya no funciona, solo el xorgconfig.
Ps.. mira yo soy nuevo en esto y no entiendo muchas cosas pero aqui esta el Xorg.0.log espero que me ayudes.


This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.

X.Org X Server 1.4.0.90
Release Date: 5 September 2007
X Protocol Version 11, Revision 0
Build Operating System: Slackware 12.1 Slackware Linux Project
Current Operating System: Linux alexredes 2.6.24.5-smp #2 SMP Wed Apr 30 13:41:38 CDT 2008 i686
Build Date: 14 December 2007 12:30:03PM

Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun May 18 12:03:02 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Including the default font path /usr/share/fonts/TTF,/usr/share/fonts/OTF,/usr/share/fonts/Type1,/usr/share/fonts/misc,/usr/share/fonts/75dpi/:unscaled.
(**) FontPath set to:
/usr/share/fonts/TTF,
/usr/share/fonts/OTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/75dpi/:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/OTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/75dpi/:unscaled
(**) RgbPath set to "/usr/share/X11/rgb"
(**) ModulePath set to "/usr/lib/xorg/modules"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81d2940
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(--) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,2560 card 0000,0000 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:02:0: chip 8086,2562 card 8086,2562 rev 03 class 03,00,00 hdr 00
(II) PCI: 00:1d:0: chip 8086,24c2 card 8086,24c0 rev 02 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,24c4 card 8086,24c0 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,24c7 card 8086,24c0 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,24cd card 8086,24c0 rev 02 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev 82 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,24c0 card 0000,0000 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,24cb card 8086,24c0 rev 02 class 01,01,8a hdr 00
(II) PCI: 00:1f:5: chip 8086,24c5 card 1019,a00a rev 02 class 04,01,00 hdr 00
(II) PCI: 00:1f:6: chip 8086,24c6 card 1543,4c21 rev 02 class 07,03,00 hdr 00
(II) PCI: 03:07:0: chip 1039,0900 card 1039,0900 rev 02 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,3), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 3: bridge is at (0:30:0), (0,3,3), BCTRL: 0x0006 (VGA_EN is cleared)
(II) Bus 3 I/O range:
[0] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B]
[1] -1 0 0x0000c400 - 0x0000c4ff (0x100) IX[B]
[2] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B]
[3] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B]
(II) Bus 3 non-prefetchable memory range:
[0] -1 0 0xdfd00000 - 0xdfdfffff (0x100000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(0:2:0) Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device rev 3, Mem @ 0xd0000000/27, 0xdff80000/19
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xe3ffffff to 0xdfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xdfdfd000 - 0xdfdfdfff (0x1000) MX[B]
[1] -1 0 0xdff7b900 - 0xdff7b9ff (0x100) MX[B]
[2] -1 0 0xdff7ba00 - 0xdff7bbff (0x200) MX[B]
[3] -1 0 0x30000000 - 0x300003ff (0x400) MX[B]
[4] -1 0 0xdff7bc00 - 0xdff7bfff (0x400) MX[B]
[5] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[6] -1 0 0xdff80000 - 0xdfffffff (0x80000) MX[B](B)
[7] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[8] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B]
[9] -1 0 0x0000dc00 - 0x0000dc7f (0x80) IX[B]
[10] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[11] -1 0 0x0000d400 - 0x0000d43f (0x40) IX[B]
[12] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[13] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[14] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[15] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[16] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[17] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[18] -1 0 0x0000ec00 - 0x0000ec1f (0x20) IX[B]
[19] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[20] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xdfdfd000 - 0xdfdfdfff (0x1000) MX[B]
[1] -1 0 0xdff7b900 - 0xdff7b9ff (0x100) MX[B]
[2] -1 0 0xdff7ba00 - 0xdff7bbff (0x200) MX[B]
[3] -1 0 0x30000000 - 0x300003ff (0x400) MX[B]
[4] -1 0 0xdff7bc00 - 0xdff7bfff (0x400) MX[B]
[5] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[6] -1 0 0xdff80000 - 0xdfffffff (0x80000) MX[B](B)
[7] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[8] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B]
[9] -1 0 0x0000dc00 - 0x0000dc7f (0x80) IX[B]
[10] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[11] -1 0 0x0000d400 - 0x0000d43f (0x40) IX[B]
[12] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[13] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[14] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[15] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[16] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[17] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[18] -1 0 0x0000ec00 - 0x0000ec1f (0x20) IX[B]
[19] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[20] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x2fffffff (0x2ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x2fffffff (0x2ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xdfdfd000 - 0xdfdfdfff (0x1000) MX[B]
[5] -1 0 0xdff7b900 - 0xdff7b9ff (0x100) MX[B]
[6] -1 0 0xdff7ba00 - 0xdff7bbff (0x200) MX[B]
[7] -1 0 0x30000000 - 0x300003ff (0x400) MX[B]
[8] -1 0 0xdff7bc00 - 0xdff7bfff (0x400) MX[B]
[9] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[10] -1 0 0xdff80000 - 0xdfffffff (0x80000) MX[B](B)
[11] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B]
[15] -1 0 0x0000dc00 - 0x0000dc7f (0x80) IX[B]
[16] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[17] -1 0 0x0000d400 - 0x0000d43f (0x40) IX[B]
[18] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[19] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[20] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[21] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[22] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[23] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[24] -1 0 0x0000ec00 - 0x0000ec1f (0x20) IX[B]
[25] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[26] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "type1" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "xtrap"
(II) Loading /usr/lib/xorg/modules/extensions//libxtrap.so
(II) Module xtrap: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DEC-XTRAP
(II) LoadModule: "type1"
(II) Loading /usr/lib/xorg/modules/fonts//libtype1.so
(II) Module type1: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Type1
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.0.90, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 2.2.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.3.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
965GM, 965GME/GLE, G33, Q35, Q33, Intel Integrated Graphics Device
(II) Primary Device is: PCI 00:02:0
(--) Chipset 845G found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x2fffffff (0x2ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xdfdfd000 - 0xdfdfdfff (0x1000) MX[B]
[5] -1 0 0xdff7b900 - 0xdff7b9ff (0x100) MX[B]
[6] -1 0 0xdff7ba00 - 0xdff7bbff (0x200) MX[B]
[7] -1 0 0x30000000 - 0x300003ff (0x400) MX[B]
[8] -1 0 0xdff7bc00 - 0xdff7bfff (0x400) MX[B]
[9] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[10] -1 0 0xdff80000 - 0xdfffffff (0x80000) MX[B](B)
[11] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B]
[15] -1 0 0x0000dc00 - 0x0000dc7f (0x80) IX[B]
[16] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[17] -1 0 0x0000d400 - 0x0000d43f (0x40) IX[B]
[18] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[19] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[20] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[21] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[22] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[23] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[24] -1 0 0x0000ec00 - 0x0000ec1f (0x20) IX[B]
[25] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[26] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x2fffffff (0x2ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xdfdfd000 - 0xdfdfdfff (0x1000) MX[B]
[5] -1 0 0xdff7b900 - 0xdff7b9ff (0x100) MX[B]
[6] -1 0 0xdff7ba00 - 0xdff7bbff (0x200) MX[B]
[7] -1 0 0x30000000 - 0x300003ff (0x400) MX[B]
[8] -1 0 0xdff7bc00 - 0xdff7bfff (0x400) MX[B]
[9] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[10] -1 0 0xdff80000 - 0xdfffffff (0x80000) MX[B](B)
[11] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[12] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[13] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[14] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B]
[18] -1 0 0x0000dc00 - 0x0000dc7f (0x80) IX[B]
[19] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[20] -1 0 0x0000d400 - 0x0000d43f (0x40) IX[B]
[21] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[22] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[23] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[24] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[25] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[26] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[27] -1 0 0x0000ec00 - 0x0000ec1f (0x20) IX[B]
[28] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[29] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
[30] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[31] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.1.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 0.1.0
ABI class: X.Org Video Driver, version 2.0
(**) intel(0): Depth 8, (--) framebuffer bpp 8
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is PseudoColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 845G
(--) intel(0): Chipset: "845G"
(--) intel(0): Linear framebuffer at 0xD0000000
(--) intel(0): IO registers at addr 0xDFF80000
(II) intel(0): 1 display pipe available.
(==) intel(0): Using EXA for acceleration
(**) intel(0): DRI is disabled because it runs only at depths 16 and 24.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Monitor0
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C bus "DVODDC_D" initialized.
(II) Loading sub module "sil164"
(II) LoadModule: "sil164"
(II) Loading /usr/lib/xorg/modules/drivers//sil164.so
(II) Module sil164: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ch7xxx"
(II) LoadModule: "ch7xxx"
(II) Loading /usr/lib/xorg/modules/drivers//ch7xxx.so
(II) Module ch7xxx: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ivch"
(II) LoadModule: "ivch"
(II) Loading /usr/lib/xorg/modules/drivers//ivch.so
(II) Module ivch: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_B" initialized.
(II) Loading sub module "tfp410"
(II) LoadModule: "tfp410"
(II) Loading /usr/lib/xorg/modules/drivers//tfp410.so
(II) Module tfp410: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) intel(0): I2C bus "DVOI2C_B" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ch7017"
(II) LoadModule: "ch7017"
(II) Loading /usr/lib/xorg/modules/drivers//ch7017.so
(II) Module ch7017: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVODDC_D" removed.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor "EPI", prod id 58710
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "640x480"x84.6 35.00 640 664 728 816 480 483 487 507 -hsync +vsync (42.9 kHz)
(II) intel(0): Modeline "800x600"x84.9 56.75 800 848 928 1056 600 603 607 633 -hsync +vsync (53.7 kHz)
(II) intel(0): EDID vendor "EPI", prod id 58710
(II) intel(0): Output VGA connected
(II) intel(0): Output VGA using initial mode 800x600
(II) intel(0): detected 128 kB GTT.
(II) intel(0): detected 892 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(**) intel(0): Display dimensions: (280, 210) mm
(**) intel(0): DPI set to (104, 139)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 2.2.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xdff80000 - 0xdfffffff (0x80000) MS[B]
[1] 0 0 0xd0000000 - 0xd7ffffff (0x8000000) MS[B]
[2] -1 0 0x00100000 - 0x2fffffff (0x2ff00000) MX[B]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[6] -1 0 0xdfdfd000 - 0xdfdfdfff (0x1000) MX[B]
[7] -1 0 0xdff7b900 - 0xdff7b9ff (0x100) MX[B]
[8] -1 0 0xdff7ba00 - 0xdff7bbff (0x200) MX[B]
[9] -1 0 0x30000000 - 0x300003ff (0x400) MX[B]
[10] -1 0 0xdff7bc00 - 0xdff7bfff (0x400) MX[B]
[11] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[12] -1 0 0xdff80000 - 0xdfffffff (0x80000) MX[B](B)
[13] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[14] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[15] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[16] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[19] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B]
[20] -1 0 0x0000dc00 - 0x0000dc7f (0x80) IX[B]
[21] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[22] -1 0 0x0000d400 - 0x0000d43f (0x40) IX[B]
[23] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[24] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[25] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[26] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[27] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[28] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[29] -1 0 0x0000ec00 - 0x0000ec1f (0x20) IX[B]
[30] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[31] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
[32] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[33] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) intel(0): Kernel reported 176384 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 705532 kB available
(EE) intel(0): [drm] Direct rendering only supported in 16 and 32 bpp modes
(==) intel(0): VideoRam: 131072 KB
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(II) intel(0): Page Flipping disabled
(==) intel(0): Write-combining range (0xd0000000,0x8000000)
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) EXA(0): Offscreen pixmap area of 3981312 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x000df000 (pgoffset 223)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x000e0000 (pgoffset 224)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x00224000 (pgoffset 548)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x00024fff: HW cursors (20 kB)
(II) intel(0): 0x00025000-0x0002cfff: logical 3D context (32 kB)
(II) intel(0): 0x000df000: end of stolen memory
(II) intel(0): 0x000df000-0x000dffff: overlay registers (4 kB, 0x000000002ce57000 physical
)
(II) intel(0): 0x000e0000-0x00223fff: front buffer (1296 kB)
(II) intel(0): 0x00224000-0x005effff: exa offscreen (3888 kB)
(II) intel(0): 0x08000000: end of aperture
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Output VGA is connected to pipe A
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(**) Option "dpms"
(**) intel(0): DPMS enabled
(II) intel(0): direct rendering: Disabled
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) AIGLX: Screen 0 is not DRI capable
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/lib/xorg/modules/extensions//libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) GLX: Initialized MESA-PROXY GL provider for screen 0
(II) intel(0): Setting screen physical size to 280 x 210
(**) Option "Protocol" "auto"
(**) Mouse0: Device: "/dev/input/mice"
(**) Mouse0: Protocol: "auto"
(**) Option "CorePointer"
(**) Mouse0: always reports core events
(**) Option "Device" "/dev/input/mice"
(==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse0: Buttons: 11
(**) Mouse0: Sensitivity: 1
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc101"
(**) Keyboard0: XkbModel: "pc101"
(**) Option "XkbLayout" "us"
(**) Keyboard0: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(II) evaluating device (Keyboard0)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) evaluating device (Mouse0)
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(--) Mouse0: PnP-detected protocol: "ExplorerPS/2"
(II) Mouse0: ps2EnableDataReporting: succeeded
Error in I830WaitLpRing(), timeout for 2 seconds
pgetbl_ctl: 0x2ffe0001getbl_err: 0x39
ipeir: 0 iphdr: 54c00006
LP ring tail: 10fe8 head: 11000 len: 1f001 start 0
eir: 0 esr: 10 emr: ff7b
instdone: ffc1 instpm: 0
memmode: 0 instps: 2f
hwstam: ffff ier: 0 imr: ffff iir: 0
Ring at virtual 0xafa22000 head 0x11000 tail 0x10fe8 count 32762
00010f80: 00000000
00010f84: 00000000
00010f88: 00000000
00010f8c: 00000000
00010f90: 00000000
00010f94: 00000000
00010f98: 00000000
00010f9c: 00000000
00010fa0: 00000000
00010fa4: 00000000
00010fa8: 00000000
00010fac: 00000000
00010fb0: 00000000
00010fb4: 00000000
00010fb8: 00000000
00010fbc: 00000000
00010fc0: 00000000
00010fc4: 00000000
00010fc8: 00000000
00010fcc: 00000000
00010fd0: 00000000
00010fd4: 00000000
00010fd8: 00000000
00010fdc: 00000000
00010fe0: 00000000
00010fe4: 00000000
00010fe8: 00000000
00010fec: 00000000
00010ff0: 00000000
00010ff4: 00000000
00010ff8: 00000000
00010ffc: 00000000
00011000: f000ed8a
Ring end
space: 16 wanted 32

Fatal server error:
lockup

Error in I830WaitLpRing(), timeout for 2 seconds
pgetbl_ctl: 0x2ffe0001getbl_err: 0x39
ipeir: 0 iphdr: 54c00006
LP ring tail: 10ff0 head: 11000 len: 1f001 start 0
eir: 0 esr: 10 emr: ff7b
instdone: ffc1 instpm: 0
memmode: 0 instps: 2f
hwstam: ffff ier: 0 imr: ffff iir: 0
Ring at virtual 0xafa22000 head 0x11000 tail 0x10ff0 count 32764
00010f80: 00000000
00010f84: 00000000
00010f88: 00000000
00010f8c: 00000000
00010f90: 00000000
00010f94: 00000000
00010f98: 00000000
00010f9c: 00000000
00010fa0: 00000000
00010fa4: 00000000
00010fa8: 00000000
00010fac: 00000000
00010fb0: 00000000
00010fb4: 00000000
00010fb8: 00000000
00010fbc: 00000000
00010fc0: 00000000
00010fc4: 00000000
00010fc8: 00000000
00010fcc: 00000000
00010fd0: 00000000
00010fd4: 00000000
00010fd8: 00000000
00010fdc: 00000000
00010fe0: 00000000
00010fe4: 00000000
00010fe8: 00000000
00010fec: 00000000
00010ff0: 00000000
00010ff4: 00000000
00010ff8: 00000000
00010ffc: 00000000
00011000: f000ed8a
Ring end
space: 8 wanted 131064

FatalError re-entered, aborting
lockup
 Perfil Email  
dracel

Desconectado
Forista Mayor
Forista Mayor
Avatar de Usuario

Registrado: Vie Jun 06, 2008 11:00 pm
Mensajes: 627
Ubicación: España/Galicia/Pontevedra/Baiona/Sabaris

Nota Publicado: Sab Jun 07, 2008 4:57 am 
Arriba  
Por lo que tu dices parece que las frecuencias puestas no son correctas
Podrias probar a poner una almohadilla a las opciones HorizSync y VertRefresh y sino va intenta mirar detras de tu monitor y mira a ver si te dice las frecuencias a las que trabaja.
Si sigue sin ir prueba con un livecd (para eso me gusta mas knoppix) y mira a ver si rula. Si rula bien coge las frecuencias que tenga este
 Perfil  
Mostrar mensajes previos:  Ordenar por  
 Página 1 de 1
  [ 9 mensajes ] 
Nuevo tema Responder al tema

Saltar a:  


¿Quién está conectado?

Usuarios navegando por este Foro: No hay usuarios registrados visitando el Foro y 2 invitados

No puede abrir nuevos temas en este Foro
No puede responder a temas en este Foro
No puede editar sus mensajes en este Foro
No puede borrar sus mensajes en este Foro
No puede enviar adjuntos en este Foro

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group :: Style based on FI Subice by phpBBservice.nl :: Todos los horarios son UTC - 6 horas
Traducción al español por Huan Manwë
phpBB SEO